Elmech Trading Co.


English  French  German  Italian  Portuguese  Spanish  

Investment Casting Waxes

Home » Products » Investment Casting Waxes


We have developed expertise in processing Wax which have multiple uses in Investment Castings Dental patterns , Tyre Manufacturing, Carbon paper manufacturing Crayon Colour manufacturing , Fishing boat Repairing Gold and silver ornaments manufacturing.

  • Investment Castings Wax
  • Ornament Wax
  • paraffin Wax
  • Rosin Wax
  • Micro Yellow Wax
  • Montan Wax

    TYPES OF WAX :

    ET 200 - FILLED PATTERN WAX
    The wax is a medium viscosity Wax Quick setting wax with minimal cavitations / Sink age Dimensionally Very table. Wide injection range, From paste to liquid Capable of producing very little release agent for removal from dies Returns to shape if distortion accurs on removal from the die Resists cracking A reclaimed pattern wax for the production of commercial type castings. Recommended maximum melting temperature of 100 C, To prevent filler separation we recommend that the wax be stirred slowly and continually.

    ET 220 - FILLED PATTERN WAX
    A Pattern Wax specifically for the production of commercial type castings A medium viscosity, Filled, pattern Wax Quick setting wax with minimal cavitations / sink age Dimensionally very stable Can be used as a liquid injection material but performs better if injected at or below the recorded congealing point Capable of producing patterns of all sizes, and thick or thin sections Non-sticky requiring very little release agent for removal from dies Returns to shape if distortion occurs on removal from the die The wax can be reclaimed fro runner systems.

    Recommended maximum melting temperature of 100 C, While maintaining the wax at temperatures exceeding 68 C it should be stirred slowly and continuously to prevent any filler from separating. When the wax is in the injection machine tank we suggest that if the holding temperature is lower then 66 c no stirring is necessary, between 66- -68 C stir occasionally.

    ET 103 - STRAIGHT PATTERN WAX
    A low viscosity, straight Wax compound Good tensile strength. It is suitable for injection or gravity pouring and ideal for dewaxing The wax can be reclaimed for use on runner systems. Recommended Maximum melting temperature of 100 C

    ET 210 - FILLED PATTERN WAX
    A Pattern Wax for the production of commercial type of castings. A medium viscosity, filled pattern wax quick setting wax with minimal covitation /sinkage dimensionally very stable can be used as liquid injection material but performs better if injected at or below the recorded congealing point below the recorded congealing point Capable of producing patterns of all size, and thick or thin sections The wax can be reclaimed for runner systems. Recommended maximum melting temperature of 100 C.

     


    Green Wax   Blue Wax
    Green Wax Blue Wax

     
    Brown Wax   Grey Wax
    Brown Wax Grey Wax

     
    Dark Green Wax   Black Wax
    Dark Green Wax Black Wax

     

    Select and click   Select All   |   Clear All  


    © Copyright 2009 - 2010. Elmech Trading Co.  Managed By ExportersIndia.Com